Redpaint Plaster – Thermal Insulation Plaster

Redpaint Plaster | Product Features and Benefits

• Provides superior thermal insulation due to low thermal conductivity.

• Offers up to 50% heat and energy savings.

• Maintains the building’s thermal balance, ensuring a comfortable environment.

• Has fire-retardant properties.

• Effectively waterproofs the surface.

• Can be easily applied at the desired thickness.

• Thermally stable; does not sag or swell.

• Can be easily applied with a trowel.

• Provides high mechanical strength.

• Durable due to its rigid-elastic structure.

• Hygienic; free from microbes and harmful organisms.

• Free from heavy metals; environmentally friendly.

• Thixotropic structure allows for easy application.

• Ready to use and water-based.

• Breathable; prevents condensation on surfaces.

• Can be produced in any desired color.

Redpaint Plaster | Application Instructions

• Always read the instructions carefully before using the product.

• Do not use products with open or damaged packaging; contact the supplier if necessary.

• The surface to be coated must be completely free of oil, dirt, and loose materials.

• For large surface applications, use a leveling tool or screed to achieve the desired thickness.

• Application temperature should be between +5 °C and +40 °C.

• Apply RP-Primer as a base coat and allow it to dry for at least 12 hours.

• After opening, stir the product with a low-speed mixer until homogeneous.

• Apply in two coats without adding water or solvents.

• On existing painted surfaces, apply RP-Primer, wait 12 hours, and then apply RP-Plaster using a steel trowel or spray pump.

• If there is a long pause during application, stir the product again before resuming; this is critical for performance.

• The final coating should be applied at least 48 hours after plastering.

• Ensure adequate ventilation during indoor application; avoid confined or unventilated areas.

• Avoid contact with skin and eyes.

• Wet material can be cleaned from hands and tools with water.

• Dried material cannot be reused.

Redpaint Plaster | Applications, Consumption & Storage Information

Applications
Redpaint Plaster can be safely used in the following areas:

• Residential buildings and living spaces

• Public buildings

• Manufacturing facilities, warehouses, and storage areas

• Hangars and cold storage facilities

• Other domestic and industrial applications

Consumption
Approximately 4 kg/m² for 10 mm thickness, depending on the surface.

Packaging

• 2.5 kg Plastic Bucket

• 15 kg Plastic Bucket

• 120 kg Drum

Storage & Shelf Life

• Can be stored for 1 year in unopened, original packaging at room temperature.

Note: These values are general guidelines and may vary depending on the surface to be applied.