Kaufmann - Raw Concrete Primer
High-adhesion exposed concrete primer for low-absorbent surfaces
KAUFMANN® Raw Concrete Primer – Durable and High-Adhesion Exterior Primer
KAUFMANN® Raw Concrete Primer is a professional exterior primer with a special acrylic-based formula, developed for low-absorption surfaces. It enhances paint adhesion, reduces paint consumption, and creates a smooth, even base, maximizing the performance and durability of exterior paints.
This water-based, acrylic emulsion primer with high adhesion is specifically designed for low-absorption and hard-to-paint surfaces such as raw concrete. When applied before the topcoat, it forms a strong bond between the surface and paint, reducing paint usage and providing a uniform, smooth finish.
KAUFMANN® Raw Concrete Primer – Product Features
-
Acrylic emulsion-based, water-based, and environmentally friendly formula
-
High adhesion increases paint bonding
-
Provides maximum adherence on low-absorption surfaces
-
Breathable structure resists moisture
-
Reduces paint consumption for economical use
-
Creates a smooth base with even paint distribution
-
Can be applied in a single coat; fast and practical solution
-
Easy application with roller, brush, or airless spray
KAUFMANN® Raw Concrete Primer – Application Areas
-
Raw concrete and precast concrete
-
Cement-based plaster
-
Plaster and puttyed surfaces
-
Drywall (gypsum board)
-
OSB and MDF
-
Sound, previously painted surfaces
Balances the surface’s absorption rate, ensuring even topcoat application and strong adhesion between the paint and the surface.
KAUFMANN® Raw Concrete Primer – Application
-
Surfaces to be primed must be dry, clean, solid, and capable of supporting the paint.
-
Remove all dirt, dust, form oil, and loose layers completely.
-
For newly plastered or concrete surfaces, allow at least 28 days of curing.
-
After completing any necessary surface repairs, apply the primer in a single coat using a brush, roller, or airless spray.
-
During application, the ambient and surface temperature should be between +5°C and +30°C.
-
Protect the surface from direct sunlight, strong wind, and frost risk during application and drying.
