Kalekim 1062 Technopool Two-Component Waterproofing Mortar
Discounted
1.280,00 TL
Provides superior flexible waterproofing for pools and wet areas.
When should you receive your offer?
Kalekim 1062 Technopool: High-Performance, Flexible Waterproofing Solution
Kalekim 1062 Technopool is a two-component, cement-based, fully elastic waterproofing mortar specifically developed for surfaces constantly exposed to water. Thanks to its special formulation, it provides excellent protection in critical areas such as swimming pools, water tanks, bathrooms, terraces, and balconies. Its high adhesion strength and crack-bridging capability extend the life of structures and create a permanent barrier against water leaks.
Technopool 1062, with its flexible structure, successfully bridges cracks caused by structural movements, offering a much more durable and reliable solution compared to traditional waterproofing materials. Its high resistance to chlorinated water and various chemicals makes it ideal for use in swimming pools. Its easy-to-apply nature and fast curing time provide time and cost advantages for both professional applicators and individual users. For those seeking long-lasting and reliable waterproofing, Kalekim 1062 Technopool is an indispensable choice.
- Composition: Two-component, cement-based
- Color: Grey (Component A) / White (Component B)
- Density: Mixture density approx. 1.80 kg/L
- Pot Life: Approximately 60 minutes (23°C, 50% RH)
- Application Temperature: Between +5°C and +35°C
- Drying Time: 5-6 hours for the first coat, 24 hours for the second coat (full cure 7 days)
- Service Temperature: Between -30°C and +80°C
- Adhesion Strength (EN 1542): ≥ 1.0 N/mm²
- Crack-Bridging Capacity (EN 1062-7): Class A3 (> 2.5 mm)
- Water Impermeability (EN 12390-8): Completely impermeable
- Consumption: Approximately 3.0-3.5 kg/m² (for two coats)
- Packaging: Component A 20 kg kraft bag, Component B 10 kg plastic jerrycan (total 30 kg set)
- Swimming Pools: Provides excellent insulation for interior surfaces of pools exposed to chlorinated water and continuous water.
- Water Tanks: Safely used in all water storage areas, including potable water tanks.
- Bathrooms and Wet Areas: Ideal for under-tile waterproofing in continuously damp areas such as showers, bathrooms, toilets, and kitchens.
- Terraces and Balconies: Creates a durable waterproofing layer against rain, snow, and UV rays in outdoor areas.
- Foundations and Basements: Effective for waterproofing foundations and basement walls against rising damp.
- Hydraulic Structures: Ensures water tightness in channels, watercourses, and other hydraulic structures.
- Spas and Thermal Facilities: Preferred in such facilities due to its resistance to high temperatures and chemicals.
Surface Preparation:
- The application surface must be clean, dry, sound, and free from adhesion-reducing substances such as oil, dust, and dirt.
- Loose particles, mortar residues, and old coatings on the surface must be mechanically removed.
- Corners and joints should be chamfered or reinforced with mesh using Kalekim repair mortars before application.
- If necessary, the surface should be lightly moistened.
Mixture Preparation:
- Pour Kalekim 1062 Technopool Component B (liquid) into a clean mixing container.
- Gradually add Component A (powder) to Component B while mixing with a low-speed mixer (400-600 rpm) for 3-5 minutes until a lump-free, homogeneous mixture is obtained.
- Allow the mixture to rest for 2-3 minutes, then re-mix briefly before use.
Application:
- Apply the prepared mortar to the surface in two coats using a brush, roller, or trowel.
- The first coat should be applied horizontally, and the second coat vertically when the first coat begins to dry (approximately 5-6 hours later).
- The waiting time between coats may vary depending on ambient temperature, but the loss of tackiness when touched is sufficient.
- The total application thickness should be at least 3 mm.
Curing and Protection:
- After application, the surface must be protected from direct sunlight, wind, and frost.
- Ensure the applied surface is not exposed to heavy loads or sharp impacts for 7 days.
- A minimum of 7 days should be waited for full curing and contact with water.
- Environmental Conditions: During application, ambient and surface temperatures should not be below +5°C or above +35°C. Avoid applying to frozen, thawing, or potentially freezing surfaces.
- Mixing: Use a low-speed mixer to achieve a correct and homogeneous mixture in the specified proportions (Component A 20 kg / Component B 10 kg). Absolutely do not add extra water or any other foreign substances.
- Airflow: Avoid application in extremely windy environments or provide protection using wind screens to prevent rapid drying.
- Skin and Eye Contact: Avoid contact with skin and eyes as it contains cement. In case of contact, wash thoroughly with plenty of water and seek medical attention if necessary. Use protective gloves and goggles.
- Inhalation: Avoid inhaling dust. Work in well-ventilated areas or use an appropriate respirator.
- Storage: The product should be stored in its original sealed packaging, in a dry place, protected from direct sunlight. It must be protected from frost. Shelf life is 12 months under correct conditions.
- Post-Application: All tools used must be cleaned with water before the material hardens. Hardened material can only be cleaned mechanically.
- Keep Out of Reach of Children: Keep out of reach of children.
Sık Sorulan Sorular
Kalekim 1062 Technopool is a highly flexible, two-component, cement-based waterproofing mortar used on surfaces continuously exposed to water, such as pools, water tanks, and bathrooms. It prevents water leaks in structures and provides long-lasting protection with its crack-bridging property.
Being two-component means the product consists of two separate parts (powder and liquid) that are mixed and activated before application. This structure allows the material to have higher flexibility, adhesion, and durability properties.
It can be safely used on all concrete, screed, and plastered surfaces that are continuously exposed to water or moisture, primarily in swimming pools, water tanks, bathrooms, terraces, balconies, foundations, and hydraulic structures.
The crack-bridging property refers to the material's ability to cover small cracks occurring in the structure with its flexible composition and prevent water passage. This extends the lifespan of the insulation, especially in areas where structural movements are expected.
Technopool 1062 stands out with its high flexibility, two-component structure, and resistance to chlorinated water and chemicals. It offers superior performance, especially in critical areas constantly exposed to water (pools, water tanks), and provides a long-lasting solution with its crack-bridging ability.
Surface preparation is critical to ensure the waterproofing mortar adheres completely to the surface and performs at its maximum. A clean, sound, and properly prepared surface directly affects the longevity and effectiveness of the insulation.
The approximate consumption of Kalekim 1062 Technopool for a two-coat application is 3.0-3.5 kg/m². This value may vary depending on the roughness of the surface and the application method.
A minimum of 7 days should be waited for full curing and for the surface to be ready for contact with water after application. This period is necessary for the material to reach its ultimate strength.
Yes, Kalekim 1062 Technopool has certificates of conformity for contact with potable water and can be safely used for waterproofing potable water tanks.
It can be applied by individual users as long as the application instructions are carefully followed. However, in large and critical areas (e.g., Olympic pools) or if there is a lack of experience, professional support will yield more reliable results.
