Filli Boya Dalmaçyalı EPS Thermal Insulation Board 5 cm Straight Edge

• Product Type: Expanded Polystyrene (EPS) Thermal Insulation Board
• Thickness: 5 cm
• Edge Type: Straight Edge
• Declared Thermal Conductivity (λD): ≤ 0.038 W/(mK)
• Density: Approx. 15-16 kg/m³
• Compressive Stress (at 10% deformation): ≥ 60 kPa
• Water Vapour Diffusion Resistance Factor (µ): 20-50
• Reaction to Fire Class: E (according to EN 13501-1)
• Dimensions: 50 cm x 100 cm (standard)
• Application Area: External facade insulation systems (ETICS)
• Standard: TS EN 13163
• Application Temperature: Between +5°C and +30°C

Filli Boya Dalmaçyalı EPS Thermal Insulation Board 5 cm Straight Edge is specifically designed to provide thermal insulation on the exterior facades of buildings. It can be safely used in a wide range of applications:

• External Thermal Insulation Composite Systems (ETICS): As the primary insulation layer in new buildings and in projects aimed at improving the energy performance of existing buildings.
• Curtain Walls and Columns: To prevent thermal bridges and ensure insulation continuity on reinforced concrete surfaces.
• Internal Wall Insulation: In internal spaces to prevent condensation and mold formation.
• Roof and Terrace Insulation: As an additional insulation layer on pitched and flat roofs.
• Floor Insulation: To contribute to thermal and sound insulation in ground and intermediate floors.
• Prefabricated Structures: Ideal for prefabricated buildings seeking fast and effective insulation solutions.

The product is preferred in various building types such as residential, commercial buildings, offices, hospitals, and educational institutions to increase energy efficiency and enhance indoor comfort.

Correct application of Filli Boya Dalmaçyalı EPS Thermal Insulation Board is critical to maximize system performance. Here is a step-by-step application guide:

1. Surface Preparation: The application surface must be free of dust, dirt, and oil, solid, dry, and even. If necessary, surface corrections should be made with repair mortar.
2. Plinth Profile Installation: At the lower level of the building, the Dalmaçyalı plinth profile is leveled and mechanically fixed to define and support the height of the insulation boards from the ground.
3. Adhesive Mortar Preparation: Filli Boya adhesive mortar is mixed with clean water according to manufacturer instructions until homogeneous, allowed to rest for 5 minutes, and then re-mixed.
4. Board Adhesion: Adhesive mortar is applied to the edges of the boards in a strip pattern, and in 3-5 dabs to the center (for cost savings or on very even surfaces). The boards are affixed to the wall starting from the plinth profile, pressing lightly and staggering them (like brickwork). Care should be taken not to let mortar squeeze out at the joints.
5. Anchoring (Dowel Fixing): At least 24-48 hours after adhesion, the boards are mechanically fixed with anchors (dowels). At least 6 anchors per square meter should be used, placed at board joints and in the center.
6. Corner Profiles and Mesh Application: Dalmaçyalı corner profiles are applied to all building corners, window, and door edges. Subsequently, an alkali-resistant plaster mesh is embedded into the first layer of Filli Boya plaster mortar, and a second layer of plaster mortar is applied over it. Meshes should overlap by at least 10 cm.
7. Decorative Render and Paint: After the plaster mortar dries, a decorative external facade render can be optionally applied, followed by the final coat with Dalmaçyalı exterior paint.

During application, ensure the air temperature is between +5°C and +30°C, and avoid freezing conditions, excessive wind, or direct sunlight. For detailed information, it is recommended to refer to the Filli Boya Dalmaçyalı system application guide.

• Storage: Products should be stored in a dry, covered environment, protected from direct sunlight, rain, and mechanical impacts, preferably on pallets.
• Application Environment: Avoid application in temperatures below +5°C or above +30°C. Application should not be done in freezing conditions or excessively hot/windy weather.
• Fire Safety: As EPS boards are a flammable material, they must be kept away from open flames, sparks, and high heat sources. Smoking should be avoided during application, and heating or welding operations should not be performed near the boards.
• Personal Protective Equipment: To prevent dust formation, personal protective equipment such as masks, goggles, and gloves should be used during cutting operations.
• Harmful Substances: The product does not contain substances harmful to human health, but it is important not to inhale dust.
• Environmental Sensitivity: Waste should be disposed of in accordance with local regulations. It should be remembered that it is a recyclable material.
• Technical Data Sheet: Refer to the product's current technical data sheet (TDS) and material safety data sheet (MSDS) for the most up-to-date and detailed information.