Isonem Street Paint - Concrete Floor Paint
Durable, flexible, water-resistant, and UV-resistant floor paint
PRODUCT DESCRIPTION
ISONEM STREET PAINT is an acrylic-based, flexible floor coating with strong adhesion capability. It provides long-lasting use with excellent water and UV resistance. Thanks to its water-based and single-component structure, it is easy to apply and dries quickly. This product can be produced in any desired color and is resistant to both pedestrian and vehicle traffic. It can be safely used in both indoor and outdoor environments such as walkways, asphalt pavings, tennis courts, and sports areas. It prevents dust formation on concrete, asphalt, and cement surfaces, providing a decorative and aesthetic appearance.
TECHNICAL SPECIFICATIONS - ISONEM STREET PAINT
-
Density (25°C, g/mL): 1.40 ± 0.10
-
pH (25°C): 7.0 – 9.0
-
Viscosity (25°C, mPa.s): 9,000 – 12,000
-
Solid Content (by weight %): 74 ± 2
-
Water transmission rate (kg/m²·h⁰·⁵): < 0.1 (Class W3)
-
Adhesion strength (Pull-off, N/mm²): 1.5 (for crack sealing or flexible systems, with traffic load)
-
Water vapor permeability (m): 5 ≤ SD ≤ 50 (Class II)
-
Solvent: Water
AREAS OF USE - ISONEM STREET PAINT
-
Garages and light traffic exposed parking areas
-
Walkways and garden floors
-
Concrete or asphalt roads, parking lot floors
-
Tennis courts, basketball and volleyball court floors
-
Playgrounds and recreational areas
Surface Preparation
The surfaces to be applied must be completely free from any oils, dirt, dust, and surface residues. The surfaces should be dry and clean; if necessary, they should be washed with water and allowed to dry. Areas requiring repair should be fixed with ISONEM M 03.
Before application, ISONEM UNIVERSAL PRIMER should be applied to the surface. The primer is diluted with water at a ratio of 1:7 (1 part primer : 7 parts water) and applied to the surface at a consumption rate of 100–200 g/m². After allowing the primer to dry for 4–6 hours, the main application can proceed.
Application Method
ISONEM STREET PAINT is ready for use. Before application, the product should be mixed homogeneously for about 5 minutes using a mixer. The product is applied in two coats using a brush, roller, or suitable sprayer; there should be a 4-hour waiting period between coats.
When applying with a sprayer, the surface should be immediately smoothed with a brush or roller to ensure uniform distribution and penetration of the product. This method guarantees a long-lasting and aesthetic surface.
CONSUMPTION
Approximately 1 kg/m² is used for two coats. The given consumption values are approximate and may vary depending on the surface area and thickness of the application.
COVERAGE AREA
-
With a 5 kg bucket, approximately 5 m² can be covered (two coats)
-
With a 10 kg bucket, approximately 10 m² can be covered (two coats)
-
With an 18 kg bucket, approximately 18 m² can be covered (two coats)
COLOR
Available in all desired colors
PACKAGING
5, 10, and 18 kg PP buckets
SHELF LIFE
The product can be used for 24 months from the manufacturing date if stored under proper conditions in unopened and undamaged packaging.
STORAGE CONDITIONS
The product should be stored in dry and cool environments. Care should be taken to ensure that the packaging lids are tightly sealed.
